![hp proliant dl360 g5 vmware esxi 5 hp proliant dl360 g5 vmware esxi 5](http://andysworld.org.uk/wp-content/uploads/2017/02/vsphere-client-000547.jpg)
- HP PROLIANT DL360 G5 VMWARE ESXI 5 INSTALL
- HP PROLIANT DL360 G5 VMWARE ESXI 5 SOFTWARE
- HP PROLIANT DL360 G5 VMWARE ESXI 5 ISO
- HP PROLIANT DL360 G5 VMWARE ESXI 5 WINDOWS
Scroll down to the supported processor (either Intel® Virtualization Technology or AMD® Virtualization), and then press Enter. Scroll down to Processor Options, and then press Enter. Scroll down to Advanced Options, and then press Enter. If you are not in RBSU, boot the server, and then press F9 to enter RBSU. Windows® 64-bit operating systems and all guest 64-bit operating systems such as Linux. Set up the server hardware, and if wanted, connect the server to the network.
HP PROLIANT DL360 G5 VMWARE ESXI 5 INSTALL
You must install the flash media into the internal port on the server. Boot the server and install the HP VMware ESXi product either to the hard drive or to flash media (USB flash drive or SD card).
HP PROLIANT DL360 G5 VMWARE ESXI 5 ISO
Burn the installation ISO to a CD, or move the ISO image to a location accessible using the virtual media capabilities of HP iLO 2 or iLO 3. This dedicated network enables a reliable connection to the hardware in the event of a network failure.Ģ. Management network-A management network enables the server administrator to manage discrete physical servers without relying on a general purpose communications network.Hosts provide processor, memory, storage, and network resources for one or more virtual machines.Īdditional HP components that complete your virtualization infrastructure:
HP PROLIANT DL360 G5 VMWARE ESXI 5 SOFTWARE
![hp proliant dl360 g5 vmware esxi 5 hp proliant dl360 g5 vmware esxi 5](https://i.ytimg.com/vi/mqkGN9_uYcY/maxresdefault.jpg)
HP CIM (Common Information Module) providers proactively surface hardware monitoring data to deliver the most up-to-date server state information possible. HP has seamlessly integrated VMware ESXi, delivering active HP ProLiant management and consolidated lifecycle management for a consistent, reliable ProLiant experience. A simple tweak for a big improvement.įor our next tests we will try to include statistics from the Freenas side, like Interface Traffic, CPU Usage and physical memory utilization to see how much impact one test has on our Freenas setup.Overview Thank you for downloading HP VMware ESXi 4.0 and updates. It seems that the auto-configure settings on the interfaces in our setup are slowing down connections terribly. – Fixed the interfaces to 1000Mbit (aka 1000baseTX)Īfter these changes we reran the above test again, with the following results: We have changed the following values on the VMWare and Freenas side on the interfaces that service the iSCSI connection: We have been doing some optimizations on the iSCSI LAN connections.
HP PROLIANT DL360 G5 VMWARE ESXI 5 WINDOWS
Second test: Windows XP running in iSCSI – LAN optimized You can compare or post your results from this test with other VMWare users on this site: VMWare Unofficial Storage Performance thread.Ī first run of the test within our Windows XP installation shows the following, promising values:Ī good first run! As we have installed Freenas, VMWare and the virtual machine without any additional configuration, optimization or tweaking what so ever, we think there is room for improvement. To get a good impression of the performance, we installed IOMeter (2006.07.27) and ran the unofficial but generally accepted VMWare Performance test using the 8GB test file from VMKTREE.ORG. So the complete virtual machine is stored on and running from this iSCSI datastore. This ‘slice’ will be our first iSCSI disk in VMWare 5.Īfter attaching the disk to VMWare, we installed Windows XP on our vMWare server, using the iSCSI storage as datastore for this virtual machine. We wanted to take it easy on the first test, so we configured the Freenas server to use iSCSI and configured a 250GB ZFS Volume on top of our ZFS RAID. We are ready to go! First test: Windows XP running on iSCSI We attached the second gigabit LAN interface of the Freenas storage and the VSphere server to this switch to create a simple iSCSI LAN. The switch is capable of Jumbo Packets (up to 9,720 bytes), but we will not be using it (yet!). This little switch will be our first link between the ESXi/VSphere server and the Freenas storage. We installed an internal 2GB USB stick in the D元60 and installed VMWare VSphere 5 (aka ESXi 5) on the box and configured or tweaked nothing besides the basic network settings.Īs for our network, we have purchased a small NetGear GS108 ProSafe 8-port Gigabit Ethernet switch. With this used hardware we have a dedicated test server we can use to put our Freenas Storage through all different kinds of test.